Origin:Mainland China Certification:NONE Brand new and high quality Name: Soldering Paste Viscosity: 160-230Pa.s Microns: 20-38um Compostion: Sn63/Pb37 Melting Point: 183 DegreeC Instructions: 1. Before the opening, the temperature of the solder paste should be raised up to the ambient temperature (more than 25degC), and the temperature return time should be about 3-4 hours. It is forbidden to use other heaters to raise the temperature instantaneously. 2. After the solder paste is opened, it is recommended to use it within 24 hours at room temperature. 3. Placed in the air for a long time, the solder paste will become a tin block due to moisture absorption. 4. The indoor temperature should be controlled at 22-28 degC, and the humidity RH30-60% is the best working environment. 5. To wipe the wrong substrate, it is recommended to use industrial alcohol or industrial cleaner. Preservation method: 1. The solder paste should be kept at 1-10 Celsius. 2. The solder paste should be used for 6 months. 3. The solder paste should not be placed in the sun. Precautions: 1. Use only with adequate Ventilation. 2. The solder paste contains organic solvent. Avoid repeated contact with skin. If the solder paste gets on your skin, wipe it off with alcohol and rinse thoroughly with water. 3. In order to be cautious, in the operation, the smoke released by the solvent during operation should be avoided as much as possible, and the skin and mucous membrane tissues should not be contacted for too long. Avoid repeated breathing of vapor. 4. Avoid contacting with eyes. 5. Keep away from children. Notice: 1. The real color of the item may be slightly different from the pictures shown on the website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data. Thank for your understanding. 3. 1cm=0.39''. Package Included: 1x Soldering Paste